
PVC Tarpaulin
Heavy-duty vinyl sheet with a polyester foundation and PVC coating. Water, abrasion and chemical resistant, with FR and cold-crack grades on request.
550–900 g/m² · polyester scrim · 100% waterproof
Request quotePVC, PE, canvas and mesh tarpaulins — coated, welded and finished for transport, industry and agriculture.
Certified under

The division
The Tarp Products Division coats, welds and finishes tarpaulins across the full material range — heavy-duty PVC tarpaulin from 550 to 900 g/m², lightweight PE tarpaulin, breathable canvas, knitted mesh, clear PVC, blackout and cross-laminated films. Every tarp is built to the customer’s size, colour and hardware specification.
Conversion is where a tarp’s service life is decided. We high-frequency and hot-air weld every seam, reinforce every edge, and fit eyelets, D-rings and tensioning hardware to the customer’s system. Fire-retardant (DIN 4102 B1 / EN 13501-1) and low-temperature grades down to −30 °C are standard options, not special orders.
Specification register
| Material / product | Specification | Typical application |
|---|---|---|
| PVC tarpaulin | 550–900 g/m² · 22–30 mil · FR & cold-crack options | Truck side curtains, flatbed tarps, machinery covers |
| PE tarpaulin | 80–180 g/m² · HDPE woven + PE laminated · UV 5+ yrs | Economy covers, hay, construction, temporary shelters |
| Canvas tarp | Breathable · cotton/poly blend · wax-finished | Equipment covers, painting, breathable load protection |
| Mesh tarpaulin | Knitted HDPE · 30–90 % shade · wind-permeable | Truck debris nets, fencing, scaffolding, windbreak |
| Clear PVC tarp | Transparent · UV-stable · cold-flexible | Patio enclosures, greenhouse doors, weather partitions |
| Blackout & cross-laminated tarp | 100 % light block · multi-layer cross-laminated film | Greenhouse light-deprivation, photography, storage |
Where it goes

Transport — truck side curtains, lumber tarps, steel tarps, trailer and dump-truck covers
Construction — machinery covers, scaffolding enclosures, concrete curing blankets
Agriculture — hay, silage and grain protection with season-long UV stability
Events & industry — tent roofs, hall covers, welding partitions and insulated enclosures
Material → application insight
That is why we test welded seam strength, cold-crack at −30 °C and flex fatigue on every coating batch, and why our finishing floor treats edge reinforcement as an engineering step, not a sewing afterthought. The fabric specification is only half of a tarp’s service life; the conversion is the other half.
TAK tarp range
Custom tarpaulins in PVC, polyethylene, canvas, mesh, polyester and vinyl — cut, welded and finished to size, colour and hardware. Filter by product, material or application, then send the specification to our engineers.
Showing 27 products

Heavy-duty vinyl sheet with a polyester foundation and PVC coating. Water, abrasion and chemical resistant, with FR and cold-crack grades on request.
550–900 g/m² · polyester scrim · 100% waterproof
Request quote
Lightweight laminated polyethylene tarp for economy covers, hay, construction and temporary shelters.
80–180 g/m² · HDPE woven + PE laminate · UV 5+ yrs
Request quote
Breathable canvas for equipment covers, painting and load protection where condensation must escape.
Cotton/poly blend · breathable · wax-finished · UV resistant
Request quote
Open-weave mesh for truck debris nets, scaffolding, fencing and windbreak where airflow matters.
Knitted HDPE or PVC grid · wind-permeable · 30–90% shade
Request quote
See-through vinyl for patio enclosures, greenhouse doors, weather partitions and light-admitting covers.
Transparent PVC · UV-stable · cold-flexible · windproof
Request quote
Light-deprivation tarp for greenhouses, photography backdrops and storage where daylight must be excluded.
100% light block · multi-layer film
Request quote
Lets moisture escape while shedding rain — used on hay, timber and equipment that cannot sit under a sealed sheet.
Vapour-permeable weave · mildew resistant
Request quote
Cross-oriented film construction for puncture and tear resistance beyond a standard laminate.
Multi-layer cross-laminated film · high tear
Request quote
Finished vinyl tarps cut, welded and fitted with eyelets, D-rings and reinforcement to the customer’s size.
PVC vinyl · heat-weldable · custom colour
Request quote
Polyester-scrim tarps specified where tensile and dimensional stability matter more than a commodity PE sheet.
High-tenacity polyester base · coated
Request quote
Roll-off, dump and open-top truck covers built to the body, with reinforced edges and customer hardware.
PVC 22–30 mil · custom length · tension hardware
Request quote
Trailer and tautliner covers matched to existing tensioning systems and curtain tracks.
Side and top systems · EN 12641-2 fabric option
Request quote
Drop-flap lumber tarps sized for timber loads, with reinforced wear points at the rub rails.
Heavy PVC · flap and D-ring layout for timber
Request quote
Steel and coil covers specified for sharp edges, with heavier coating and reinforced corners.
Abrasion-resistant PVC · coil and plate duty
Request quote
Flatbed load tarps in stock colours or custom print, finished with hems, ropes and corner patches.
Full-coverage flatbed · grommet spacing to spec
Request quote
Covers for open-top containers and roll-off boxes, cut to the container envelope.
Open-top container covers · lashing points
Request quote
Season-long hay and straw covers with a UV package matched to the climate zone.
UV-stabilised PE or breathable weave
Request quote
Farm tarps for grain, silage edges, livestock shelters and field storage.
Crop, grain and livestock covers · UV declared
Request quote
Job-site covers for materials, openings and temporary weather walls.
Site enclosures · FR option DIN 4102 B1
Request quote
Flame-retardant industrial fabric for welding bays, event halls and site partitions.
DIN 4102 B1 / EN 13501-1 · welding shelters
Request quote
Containment and weather sheets for scaffolding, solid or wind-permeable mesh.
Mesh or solid · eyelet layout for scaffold tubes
Request quote
Temporary roof tarps for storm damage and construction openings.
Emergency roof cover · reinforced hems
Request quote
Vehicle covers for storage and transport, in PE or coated fabric.
Shaped or flat · soft inner face option
Request quote
Boat and dock covers cut to the hull, with UV stabilisers for salt-air service.
Marine-grade · UV and mildew package
Request quote
Pool covers sized to the waterline, in solid or mesh grades.
Winter and safety covers · custom shape
Request quote
Event and camping tent fabric, including clear panels and FR grades for public venues.
Tent roofs and side walls · weldable PVC
Request quote
Heavy-duty acoustic tarp designed to reduce construction and industrial noise, with reinforced seams and eyelets for secure installation.
Acoustic PVC-coated fabric · reinforced edges · custom sizes
Request quoteNext division — 03
Garden Products Division
Work with a certified supplier
Send us your duty cycle, standard or target specification — our engineers respond with material options, certifications and indicative lead times.